Ez Computerहिन्दीOpen app

Output Devices

Preview Part B: Hardware · Chapter 9 · 15 min read · 57 practice questions

After this chapter you will be able to

  • distinguish soft-copy and hard-copy output
  • compare CRT, LCD, LED and OLED displays
  • explain resolution, pixel, refresh rate and aspect ratio
  • classify printers as impact or non-impact and match their speed units
  • describe plotters, projectors, 3D printers and audio output
Output devices Soft and hard copy Soft: screen, speaker Hard: paper, plotter 3D printer: solid object Monitors CRT: old, bulky LCD: backlit crystals OLED: self-lit pixels Resolution Full HD 1920 × 1080 4K 3840 × 2160 Refresh rate in Hz Printers Impact: strikes ribbon Non-impact: no strike Dot-matrix: 9/24 pins Units and colour CPS, LPM, PPM RGB for screens CMYK for printers Other outputs Plotter: CAD, maps Projector, speakers Braille display
Chapter 9 at a glance Monitors give soft copy, printers give hard copy. Remember each printer's speed unit: CPS, LPM or PPM.

9.1 What Is an Output Device?

An output device converts processed binary data into a form humans can see, hear or touch.

Output Meaning Devices
Soft copy Temporary, non-physical output Monitor, projector, speaker
Hard copy Permanent, physical output on paper or material Printer, plotter, 3D printer

9.2 Monitors (Visual Display Units)

CRT: deep tube Thin LCD / LED panel Pixel (RGB)
Monitors: CRT vs flat screens A CRT needs a deep tube behind the glass. LCD and LED screens are thin panels, and every picture is built from pixels of red, green and blue light.
4K UHD 3840 × 2160Full HD 1920 × 1080HD 1280 × 720VGA 640 × 4801920 × 1080≈ 2 million pixels3840 × 2160≈ 8.3 million pixels4× the pixels of Full HDDrawn to scale
Resolution: more pixels, sharper picture Resolution is pixels across × pixels down. 4K has four times the pixels of Full HD.

The monitor (VDU — Visual Display Unit) is the main output device.

Type Full form Working Remarks
CRT Cathode Ray Tube One or more electron guns fire beams at phosphor dots on the screen Bulky, heavy, high power; obsolete. It is a vacuum tube with a rectangular screen. CRT invented by Karl Ferdinand Braun (1897)
LCD Liquid Crystal Display Liquid crystals control light from a backlight (older: CCFL lamps) Thin, light, low power
LED Light Emitting Diode (LED-backlit LCD) An LCD panel lit by LEDs Brighter, thinner, lower power than CCFL-LCD
OLED Organic LED Each pixel makes its own light — no backlight True black, very thin, flexible; used in premium phones and TVs
Plasma Plasma Display Panel (PDP) Tiny cells of ionised gas glow when an electric field is applied Large TVs; now discontinued
QLED Quantum-dot LED LCD with a quantum-dot layer for better colour Modern TVs
E-ink Electronic ink Reflects light like paper E-book readers (e.g., Kindle)

⚠ COMMON CONFUSION — Most “LED monitors” are really LCDs with LED backlighting. Only OLED pixels produce their own light.

Display Terms

Term Meaning
Pixel Picture element — the smallest dot on a screen
Resolution Number of pixels across × down (e.g., 1920 × 1080). More pixels = sharper image
Screen size Measured diagonally in inches
Aspect ratio Width : height — 16:9 is standard today; 4:3 was older
Refresh rate How many times per second the image is redrawn — Hz (60 Hz, 120 Hz, 144 Hz)
Dot pitch Distance between pixels of the same colour — smaller is sharper
Response time Time for a pixel to change colour (ms) — lower is better for games
Colour depth Bits per pixel for colour (24-bit = about 16.7 million colours)
RGB Red, Green, Blue — the three primary colours used to make every screen colour
PPI Pixels Per Inch — pixel density of a screen or a scanned image
Standard Resolution
VGA 640 × 480
HD (720p) 1280 × 720
Full HD (1080p) 1920 × 1080
QHD / 2K (1440p) 2560 × 1440
4K UHD 3840 × 2160
8K UHD 7680 × 4320

Colour Models

Model Full form Used for Basis
RGB Red, Green, Blue Screens and monitors Additive (light is added)
CMYK Cyan, Magenta, Yellow, Key (Black) Colour printing Subtractive (ink absorbs light)
HSB / HSV Hue, Saturation, Brightness / Value Choosing colours in design tools Describes colour by hue, saturation and brightness

★ EXAM POINT — Pixel = picture element. Screen size is measured diagonally. Monitors use the RGB colour model; printers use CMYK (Cyan, Magenta, Yellow, Key/Black).

What the full chapter covers

The full chapter has these sections:

  1. 9.1 What Is an Output Device?
  2. 9.2 Monitors (Visual Display Units)
  3. 9.3 Printers
  4. 9.4 Plotters
  5. 9.5 3D Printers
  6. 9.6 Other Output Devices
  7. 9.7 Pioneers and Historical Firsts
  8. 9.8 More Exam Facts
  9. Chapter Quick Revision
  10. Most Important Terms
  11. Common Confusions
  12. Rapid Recall

Sample questions from this chapter

1. Printer that uses a focused light beam?

  1. Dot-matrix printer
  2. Laser printer
  3. Thermal printer
  4. Inkjet printer
Show answer

Answer: B. Laser printer

A laser printer draws the page with a focused light beam on a drum, then fuses toner.

2. Printer with type carried on a continuous chain?

  1. Daisy-wheel printer
  2. Drum printer
  3. Dot-matrix printer
  4. Chain printer
Show answer

Answer: D. Chain printer

A chain printer is a line printer whose characters sit on a continuous chain.

3. Printer that uses toner?

  1. Dot-matrix printer
  2. Thermal printer
  3. Inkjet printer
  4. Laser printer
Show answer

Answer: D. Laser printer

Laser printers use dry toner powder, fused onto paper by heat.

4. Full form of LCD?

  1. Liquid Crystal Drive
  2. Liquid Crystal Display
  3. Liquid Crystal Device
  4. Light Crystal Display
Show answer

Answer: B. Liquid Crystal Display

LCD uses liquid crystals that block or pass light from a backlight; it is used in most modern screens.

5. Engineer credited with the first 3D printer?

  1. Nathaniel Baldwin
  2. William Fetter
  3. Chuck Hull
  4. Gary Starkweather
Show answer

Answer: C. Chuck Hull

Chuck Hull invented stereolithography in the 1980s, the basis of 3D printing.